How to clean kitchen wood from grease

Kitchen wood stains

Kitchen furniture in general and cabinet wood in particular are exposed to many pollutants during the day, as various kitchen tasks such as preparing food, cooking, washing dishes, and the moisture resulting from all of that pollute it. Grease stains on wood are considered one of the biggest cleaning problems facing housewives. Because its nature resulting from cooking oils or butter and others is sticky and can stick to any surface it falls on, and the nature of wooden surfaces increases the adhesion of these spots to them, and with the passage of time dust, lint and more fats accumulate on them, and they become difficult spots, and in this article a group of One way to clean these spots.

How to clean kitchen wood from grease

Degreasing cleanser

Grease-solving cleaners can be used to remove grease on wood surfaces that can withstand alkaline solutions. A multi-purpose cleaner that contains orange oil is best. Because it is able to effectively dissolve grease from surfaces, and it is safer for the home and family, and it is advised to follow the following steps and tips when using one of the grease cleaners:

Cover delicate foods and kitchen surfaces that the cleaner might fall on.
The cleaning place must be well ventilated, and it is recommended to wear gloves to protect hands.
It is preferable to cover electrical appliances and all sources of flame when starting to clean.
Follow the manufacturer's instructions for using the grease cleaner in the correct and safe way.
Unscrew the doors of the kitchen cabinets and remove their hinges, if possible, as they can be cleaned separately by soaking them in a cleaning solution.
Dilute the detergent with water according to the instructions, and spray the cleaning solution on the inside of the cabinets as an experiment to make sure that it is effective on stains and safe on color at the same time. If the solution is not strong enough to get rid of stains, it is recommended to increase its concentration.
Spread the active cleaning solution over the entire surface of the wood, and leave for a minute or two to help loosen tough stains.
It is recommended to wait ten minutes for the solution to dissolve all the fat in case the wood is dirty with strong stains.
The surface is rubbed in a circular motion using a sponge or brush until the stains are removed. If the stains are very solid, a spatula can be used to remove them from the surface, and care must be taken not to cause scratches.
Repeat the use of the solution until the stains are completely gone.
Wipe the surface with water and dry it with a towel to remove the cleaning solution.

Dishwashing liquid

Dishwashing liquid is an alkaline solution and has the ability to dissolve fats, and its effectiveness can be enhanced by using hot water alongside it, as it is known that solid fats tend to melt when exposed to high heat, as a small amount of dishwashing liquid can be diluted in a bucket of hot water And use a piece of cloth to rub the grease stains stuck in the cabinet, and it is preferable to keep the water hot during cleaning, and avoid pressing hard so as not to scratch the surface or reduce its gloss, then rinse it and dry the cabinets when finished.

Baking soda

Baking soda is effective on fats and is gentle on wooden surfaces in general, so it can be used by putting a little warm water on a cleaning brush and adding an amount of baking soda to it, then rubbing the cabinets and kitchen wood completely, and then wiping all surfaces with a damp, warm cloth To remove baking soda residue.

vinegar and water

The properties of vinegar can be used in the process of cleaning kitchen wood from grease and other stains. This is because it contains natural acids, and it can be used by soaking a clean towel in a container containing vinegar without diluting it, wiping greasy stains from the cabinets and leaving it for between ten minutes to a quarter of an hour, then wiping it with a damp sponge, and re-wiping it with a cloth dampened with water, and it is preferable to repeat this process. The method is on stubborn stains to get rid of them, and it is worth noting that the smell of vinegar disappears once the wood is completely dried.

Mixture of vinegar and salt

This mixture can be used to clean hard and sticky fats, and it is prepared by mixing an equal amount of salt and vinegar to obtain a paste, and it is used by applying the paste on the fat spots and leaving it for a few minutes, then rubbing it gently with a soft toothbrush, and it is preferable to avoid vigorous rubbing or using a rough or metal sponge ; To avoid scratching the surface of the wood, then wipe the wood with water and dry it well with a clean, dry towel.

Baking soda and oil mixture

Half a cup of vegetable oil can be mixed with a cup of baking soda and stirred in a bowl, and more soda can be added if the mixture is liquid to obtain a paste, and it is used by distributing it on fat spots and handles of kitchen cabinets and leaving it for at least four minutes, then wiping Fat with a soft, damp cloth.

A mixture of vinegar and citrus peels

The peels of citrus fruits contain essential oils that break down the fats and clean them. A vinegar and citrus spray can be prepared by filling three-quarters of a glass container with the peels of citrus fruits and covering it completely with white vinegar. The glass container is left covered for a period of two to three weeks, and then The peels are filtered, and the solution is placed in a spray bottle; And use it to clean the fat by spraying it on the wood and then wiping it in the usual way.

Tips for preserving wood in the kitchen

Here are some tips for caring for and preserving kitchen wood:

Clean the wood with the least amount of water possible, as the wood can absorb water and its shape may change later, so it is recommended to dry it well.
Periodically wipe the dust from the kitchen wood, as cooking fats can stick more to dusty surfaces, making them more difficult to clean.
Polishing the kitchen wood using wood polish to give it a new and bright look, but care must be taken to ensure that the wood is completely clean before using the polish.