How to clean kitchen tiles

Kitchen tile cleaning

Kitchen tiles get dirty constantly, and they become greasy as a result of the cooking process. In addition, the kitchen is one of the most used places in the house, and no one denies that kitchen tiles that shine from cleanliness have an effect on the appearance of the kitchen in general. It is dull and dirty in appearance, so some effective and quick methods can be followed, which facilitate the process of cleaning kitchen tiles.

How to clean ceramic and porcelain kitchen tiles

Ceramic and porcelain tiles are very good options for kitchen floors, because they are durable and stain-resistant types of tiles, in addition to being tiles with fewer pores than wood, which does not cause concern, or trying to clean it immediately when liquids are spilled on it, as for cleaning it, you must know The quality in the kitchen before starting cleaning, as some detergents may affect certain types of tiles, and a test can be done for the extent of the detergent’s effect on a small hidden spot of the tiles, as for the following method, it is considered a safe method on all types of ceramic and porcelain, and it is as follows:

• Materials needed:
  • Ordinary broom.
  • White vinegar.
  • Hot water.
  • spray bottle (spray).
  • wiper.
  • 5 to 10 drops of an essential oil (such as orange, peppermint, or lavender).

• Action Steps:
• The floor is cleaned by sweeping it to remove dust and crumbs, with the need to clean the corners near the walls and cabinets well, because crumbs and dirt usually gather in those places.
• The cleaning solution is prepared by mixing equal quantities of vinegar with hot water and several drops of essential oil, then pour it into a spray bottle and shake well to homogenize the materials.
• The solution is tested on an inconspicuous area of ​​the tiles to ensure that it does not affect it or cause damage to it.
• The floor is sprayed with a cleaning solution, so that it becomes wet, taking into account not to spray large quantities; So that the ground does not become wet.
• The floor is rubbed with a microfiber mop, rubbed to the right and left, then from top to bottom to make sure that it is well cleaned even from the cracks.
• The previous steps are repeated until completely finished, after which we put only water inside the package, without vinegar and sprinkle the floor again, and use another clean mop to dry, and to remove any remnants of vinegar.
• The floor is left to dry for at least half an hour before walking on it to avoid transferring dirt to it again.

How to clean hardwood kitchen tiles

Water cannot be used on hardwood tiles, as the use of water or liquids on it will damage it, and the method for cleaning it is:

• Materials needed:
  • Ordinary broom.
  • The cleaner for hardwood floors.
  • Microfiber mop.

• Action Steps:
  • Sweep the tiles well, so that the dirt is swept in the corners, and under the furniture.
  • Use the detergent according to the instructions on the package, to mix it in the right way.
• The cleaner is applied to the microfiber mop, or the tiles are carefully sprayed with the cleaner, then wiped and rubbed with the mop.

Note: Castile soap can be used for hard wood, by mixing a teaspoon of it with four cups of water, and 5-10 drops of essential oil can be added to the mixture (optional), and put the mixture in a spray bottle, then spray a small area of ​​the tiles with a very small amount of The mixture, and wipe it with a dry microfiber mop immediately, until the entire area is finished, taking into account not to let moisture enter the tiles, using a dry mop, not a wet one, and making sure to dry the tiles well.

Basic steps to take care of tile floors

Tile floors must be taken care of on a daily basis to keep them from damage as much as possible, and here are some steps to achieve this:

• Sweep the tiles with a regular broom, or with a vacuum cleaner on a daily basis, to get rid of crumbs and dust.
• Vacuum the tiles before wiping or rinsing them.
• Run a dry dusting cloth or mop over the tiles after vacuuming.
• Use a soft-bristled broom on marble floors or natural stone tiles, as a rough broom will scratch these types of tiles.
• Wiping the tiles with warm water, using a wet mop, and washing the mop after wiping each section of the tiles until all sections are finished, in case the tiles do not need a deep cleaning, and several drops of dishwashing liquid can be added to the wiping water; For more cleanliness.
• Use a clean, damp or dry mop to wipe down the tiles after wiping for an extra shine.
• Clean the liquids directly when they are spilled on the tiles, as the tiles will drink them quickly, which makes the cleaning process difficult.
• Cleaning some dirt, such as dirt from pets, or a piece of uncooked meat that fell, using the sterilizer, by spraying it directly on the stain only, then wiping it.

How to clean kitchen tiles according to their type

There are several techniques for cleaning tiles according to their type and constituent materials, in order to keep them as new, including the following:

• Use a gentle cleaner on the slate tiles (shale stone), so that it does not contain any kind of acid, and dry it well immediately if the tiles are coated.
• Do not use acid-containing cleaners, such as vinegar and lemon, on marble tiles, and do not use a rough brush when cleaning it.
• Use a gentle, pH-balanced cleanser on granite tiles, and polish can be used to polish it.
• Use a vinyl cleaner on vinyl tiles, or use water and vinegar, and do not use any rough tools or strong detergents, so as not to scratch the tiles.
• The linoleum tile is swept (in English: Linoleum Tile), then washed with its own cleaner, or a mixture of borax powder (borax) with water is used, rinsed with clean water after that, and left to dry, and the floor can be waxed once every three to six months.
• Cleaning the cork tiles with water and vinegar, or a mild detergent, if the cork surface is sealed with polyurethane, and if it is not sealed or waxed, then the instructions for cleaning the polyurethane are followed, and the floor is waxed with liquid wax, Or crucifixion immediately after the floor has dried.
• Do not use a steam mop on cork, vinyl, and linoleum tiles, as they are floors that cannot withstand high temperatures, and are not designed to withstand moisture entry.
• Clean the grout tiles using a paste made of baking soda and water, then apply it to the stain, leave it overnight, and rub it with a non-metallic brush the next day.