Modus operandi lamb feast for children

Eid al-Adha

Muslims celebrate Eid al-Adha after completing the Hajj, which is their second holiday. Eid traditions and ways of celebrating it may differ according to the customs and traditions of each country. However, the main and constant link is offering the sacrifice and sensing the goal and the sublime purpose of it. Eid decorations are among the most common traditions among Muslims. Different societies that bring joy and happiness to the heart of everyone, especially children.

Modus operandi lamb feast for children

There are many ideas and creative ways to make an Eid lamb for children, including:

Method 1

The Eid lamb made of cotton balls and newspaper can be made by following the following:

materials needed

• Many balls of cotton.
• newspaper.
• Glue.
• Black duct tape.
• Black cardboard.
• a pair of scissors.
• Plastic eyes used in the manufacture of dolls.
• Juice drink straws.

How to prepare

• Bend the newspaper paper to obtain a circular shape of the desired size to make the body of the lamb. More paper can be used to make the shape larger, then fix this circular shape using adhesive.
• Divide the drink straws into four sections of equal size using scissors to make the legs of the lamb. Then the circular shape is pierced with four holes using scissors. The straws are fixed in the holes using glue and left for a while to dry. The length of the straws can be shortened according to the desired length.
• The cotton balls are attached to the entire circular shape using glue, and it is left for a while to dry.
• The lamb's face is made using black cardboard, where scissors are used to obtain small squares that are bent in the middle and then cut in a heart-like shape so that its base is wide instead of being sharp.
• The lamb's ears are made by following the steps of making the face. In addition to the last step, bending the heart-like shape in half and cutting it to get the shape of two symmetrical ears.
• Complete the details of the face by sticking the plastic ears and eyes to the face using glue, leaving it to dry and then fixing it using glue also on a separate piece of cotton that is later attached to the front of the circular shape.
• The leg details are completed using small pieces of black masking tape and securing them to the end of the straws.

The second method

A lamb made of woolen threads and fur sticks can be made by following the following steps:

materials needed

• white wool.
• Floppy black fur poles.
• Cardboard or black foam paper.
• Plastic eyes used in the manufacture of dolls.
• Glue.
• a pair of scissors.
• scalpel.

How to prepare

• A medium-sized circle is drawn on black cardboard and cut using scissors, then a small circle is drawn in the middle and hollowed out using a scalpel, the steps are repeated again to obtain two identical circles.
• The two circles are used to obtain the shape of the lamb's body, where the two circles are placed on top of each other, and the first step is to insert the wool thread through the hole in the middle of the two circles and tie it with a knot, then take it out and reinsert it again.
• This step continues until the end of wrapping the woolen thread around the two circles and reaching the required size. It is advised not to use all the woolen threads in order to benefit from them in the next step.
• Scissors are used to cut the wool on the outer edges of the two circles, then a wool thread is used from the remaining threads and inserted between the two circles to make a tight knot, and it is tightened several times tightly around the midpoint between the two circles.
• Scissors are used again to cut the two circles from the tip, pulled from the ball of wool, and cut the rest of the woolen thread used to make the knot.
• The shape of the sheep's head and ears is drawn on cardboard or black foam paper. Ready-made templates printed from the Internet can be used.
• The plastic eyes are attached to the face using adhesive tape, and the head is attached to the body of the sheep.
• The black fur sticks are folded in the middle and affixed well to the body of the lamb, and the ends of the sticks are bent to increase its balance and to represent a shape similar to the legs of a sheep.

The third method

A lamb made of polyester balls and black cardboard can be made by following:

materials needed

• black cardboard.
• a pair of scissors.
• glue.
• paintbrush
• Plastic eyes for crafts.
• Small white polystyrene balls.

How to prepare

• The shapes to be used to make the shape of the sheep’s body are drawn on black cardboard, and they include the shape of the body, which may be circular, or any other desired shape, and its size is the largest among the rest of the shapes, and four thin rectangles representing the legs so that the front is slightly shorter than the rear, and the shape A medium-sized oval for the face, and two small ovals for the ears.
• Use a paintbrush to spread the glue over the body of the sheep.
• Polystyrene balls are spread on the glue and distributed over the entire body. They are pressed gently to be fully fixed, and left for a while to dry.
• The plastic eyes and ears are affixed to the face, and then the face is affixed to the body using glue, and it is left for a while to dry and fix.
• The legs are attached to the lower side of the body.

Fourth method

A lamb made of cotton swabs and wooden tweezers can be made by following the following steps:

materials needed

• White cardboard.
• cotton swabs
• a pair of scissors.
• Glue.
• wooden tweezers.
• Black ink pen.

How to prepare

• Drawing the shape of the sheep's body and head through a computer program.
• Print the drawn shape on white paper, and cut it out.
• Cut the cotton sticks from the top and bottom with a length of 1.27 centimeters, so that the parts that contain the cotton are used and the rest of the stick is discarded.
• The tops of the cotton swabs are attached to the body of the lamb, in order, from the end to the front, using glue, and left to dry.
• The tops of the cotton swabs are attached to the sheep's head, using two peaks for the ears and three peaks for the front head hair, and they are left to dry.
• An ink pen is used to draw the features of the sheep's face.
• The sheep's face is attached to its body using glue.
• Two wooden tongs are attached behind the shape of the lamb's body and attached with glue, making sure that the figure is balanced on them so that they can be adjusted when necessary, and the whole shape is left to dry.
• The phrase “Happy Eid Al-Adha” or “Eid Mubarak” or other phrases can be written on a small sheet of white cardboard, and then the two tweezers are opened and the paper is fixed between them.