How to make a fish tank ornament

Fish tanks

There are many studies about fish tanks and their effect on the individual. They relieve stress and add beauty to the place in which they are located. In addition, they have a strong effect on children, as they teach the child to love care and care for pets, which works to improve his personality in the future, but Before owning a fish tank, people must be sufficiently knowledgeable about this subject and know how to care for it. Help can be sought at the beginning. When owning a fish tank, the size and shape of the tank do not matter, as this is due to the individual’s financial situation.

How to make an ornamental aquarium

Making a fish tank is one of the fun and interesting activities, and it is also less expensive than buying a new tank from the store. To make an ornamental fish tank, you can follow the following steps:

Materials needed:
Pieces of front and rear glass, suitable side glass, and a piece of glass for the base, as they must be of appropriate and equal sizes.
Leakproof silicone.
Sticky tape.
Sanding cloth to remove excess silicone.
paper towels;

The method of work:
Before starting to assemble the sink, you must sand the cut pieces of glass to remove excess and sharp pieces from them. If the glass pieces are ready, there is no need to sand them.
Clean all edges of the glass pane from the inside using acetone on a paper towel.
Prepare 16 pieces of 5-inch adhesive tape and stick them in such a way that one end is sticky and the rest is free and not attached and close at hand to facilitate the work, taking into account that the place where they are attached is clean.
If some problems are encountered with the adhesive, such as it not adhering to the glass during work, it is recommended to wipe the glass well using acetone and paper towels, as the reason may be that the glass is not cleaned well.
Installing the glass panels. When the glass pieces are assembled and arranged and the position of each piece is determined, the bottom piece is taken and placed on a flat, clean surface. After that, 8 pieces of adhesive tape are attached, two pieces on each side of the bottom glass along with the edges.
Install the windshield by placing a straight line of silicone on the inner edges and on all the edges to be glued. Then, insert the glass into the bottom piece by sticking it in a straight position and pressing gently on it, and installing the silicone when placing the windshield. Next comes folding the two lower pieces of adhesive tape upwards. And stick it to the front of the glass.
Install the side glass in the same way with silicone, fold the adhesive tape up towards the front, and attach the side piece to the front by wrapping two pieces of adhesive tape around the corner from one side towards the other.
Install the back part in the same way, and install the other side part and the back panel. After putting all the pieces in place, silicone is applied to all 8 internal joints in the tank from the inside.
Allow the silicone sink to dry for 24 hours, then sand off the excess silicone using a sanding cloth, then fill the tank with clean water for 12 to 24 hours to test the sink if there is a leak or if the sink was made successfully.

Preparing the aquarium from the inside:

After making the basin and testing its effectiveness and success, the basin is prepared from the inside by following the following steps:

Choose the fish to be raised that is suitable for the tank that has been created.
Choose and prepare a filter whose size matches the size of the aquarium, as there are types of filters that can absorb food residues and waste through a tube, and there are those that work with a mesh system that lifts gravel and filters the water.
Choose gravel and sand, as gravel acts as a water filter that preserves food and makes it float on the water to help fish find it easily.
Choose a suitable place for the tank before adding water, so that it is a well-ventilated and well-lit place suitable for fish life.
Add some decorations, such as plants and decorations that fish consider to be their homes and a place to escape and hide.
After filling the tank, leave it for two hours in order for the pebbles and decorations to settle in place, and to make the water chemistry appropriate, in addition to heating the water.
Introducing fish into the aquarium.

Ornamental fish species

There are many types of ornamental fish, including the following:

the Golden Fish: The goldfish is one of the fish that is easy to care for, but it grows quickly and reaches a size of 12 to 14 inches, but it is preferable to keep it with animals of its size. Because they eat smaller animals.
Tetra fish: Tetra is a popular fish and has many varieties. It is easy to care for and is small in size.
catfish: This type of fish is similar to tetras and rasboras. It is also calm and lives at the bottom of the tank. Its length ranges from 1 inch to 3 inches. It must be fed different and varied types of food. It also eats crumbs at the bottom of the tank, thus cleaning the floor of the tank from food residue. .
Platy fish: Its length is 3 inches, and this fish is considered one of the strong fish that can live in waters of a difficult nature, and even prefers it. It also loves food and will eat any kind of it.
Betta fish: This fish is suitable for people who do not have experience in raising fish, as it is easy to care for, and it can be kept alone inside the aquarium, or with tetras or any type of peaceful fish.
Tilapia fish: It is 3 inches in size, yellow and black in color, reproduces easily, and can be kept with any non-violent fish.
Kohli loach fish: This fish resembles small snakes, and lives at the bottom of the aquarium and behind the aquarium decor because it is shy. It is also a nocturnal fish that reaches a length of 4 inches.
Angelfish: This fish is distinguished by its beautiful shape, wonderful fins, and distinctive striped shape. It lives with tetras, rasboras, and other pet fish. It is also preferable to keep only one of its kind because it quarrels with fish of the same kind.